This article explains, in educational terms, titanium dental implants — how the technology works and where it fits. A complete restoration generally involves three parts: the implant body placed in bone, an abutment that connects to it, and the final crown, bridge, or denture that a clinician restores on top. As a medical device manufacturer, INVAMED develops technologies in this area; the information here is educational and not medical advice.
Background: Dental Restoration with Osseointegrated Titanium Implants
Dental implants are small titanium fixtures placed into the jawbone to serve as artificial tooth roots, onto which a prosthetic tooth or bridge can later be attached. Modern implant workflows are typically staged over several months to allow healing, though timelines and loading protocols are determined by the treating clinician for each case. Titanium is widely used because it is biocompatible and can integrate with bone; surface treatments are designed to encourage that integration further.
Titanium Dental Implants
Titanium dental implants act as replacement tooth roots that are surgically placed into the jawbone to support a later prosthesis. Titanium is chosen for its biocompatibility and its capacity to integrate with surrounding bone, which is central to implant stability. DENTURA Dental Implants use a titanium implant body offered in multiple diameter and length options so a clinician can match anatomy and site. Whether a titanium implant is appropriate for a particular patient is a clinical decision that depends on bone volume, site, and overall assessment.
Design and Technical Notes
INVAMED organizes the DENTURA dental line around the components and processes involved in placing an osseointegrated implant and building a prosthesis on top of it. Manufacturer figures such as osseointegration rates exceeding 95% at 5 years describe studied performance, not individual guarantees. DENTURA components are intended for use by trained dental clinicians following the applicable technique and IFU.
Key Considerations
- DENTURA components are intended for use by trained dental clinicians following the applicable technique and IFU.
- Adequate bone volume and quality at the implant site are central to planning, and may prompt consideration of grafting as judged by the clinician.
- Component compatibility between the implant body and the DENTURA Dental Abutment platform should be confirmed against product documentation.
Frequently Asked Questions
What is the INVAMED dental implant system called?
INVAMED's dental line is the DENTURA system, comprising the DENTURA Dental Implants, the DENTURA Dental Abutment, and the DENTURA Dental Surgical Kit.
What osseointegration figures does INVAMED report?
INVAMED reports osseointegration rates exceeding 95% at 5 years for DENTURA implants; this describes studied performance and is not a guarantee for an individual.
What are DENTURA implants made of?
DENTURA Dental Implants use a titanium implant body with an osseointegration-enhancing surface treatment, and are offered in multiple diameter and length options.
About INVAMED
Device availability and regulatory status vary by country. Please contact INVAMED or your authorized local distributor for current regulatory information applicable to your region.
Clinical and Technical Context
The DENTURA system from INVAMED groups the implant fixtures, prosthetic abutments, and surgical instrumentation intended for placing and restoring these implants. The DENTURA Dental Surgical Kit is the instrumentation component of the DENTURA system, intended to support placement of DENTURA implants. Whether immediate or delayed loading is appropriate is determined by the treating clinician, not by the device alone. The clinical relevance of any surface treatment is assessed within the whole treatment plan by the placing clinician. INVAMED reports osseointegration rates exceeding 95% at 5 years for its DENTURA implants, a figure that describes studied performance rather than an individual guarantee. Adequate bone volume and quality at the implant site are central to planning, and may prompt consideration of grafting as judged by the clinician. Cost and treatment packages are set by the providing clinic and depend on many case-specific factors rather than the device alone. DENTURA components are intended for use by trained dental clinicians following the applicable technique and IFU.
Related on INVAMED
- Dental Products — product category
- Implant Surface Treatment: Technology, Uses and Considerations
- The Dental Implant Procedure: How It Works and Why It Matters
- DENTURA Dental Surgical Kit: What Clinicians and Buyers Should Know
Important Disclaimer
This article is intended for general educational and technical information about medical device technologies. It is not medical advice, a diagnosis, or a treatment recommendation, and it does not replace consultation with a qualified healthcare professional. Any decision about diagnosis or treatment should be made by a licensed clinician based on an individual assessment. INVAMED devices are intended for use by trained healthcare professionals in accordance with the applicable Instructions for Use (IFU) and local regulatory approvals. Product availability and indications vary by country.
Reviewed by the INVAMED Medical Affairs team. Content is educational and technical in nature.