Peta Sternal Closure Plate

Peta Sternal Closure Plate

A 鈦 或 合金 胸骨接骨板系統提供 死板 胸骨中線切除術後的固定，加強 胸骨穩定性 並降低心臟手術後的感染或開裂風險。

資訊

的 PetaⓇ Sternum Closure Plate addresses the challenges associated with fixating a 90-degree sternal incision or rib osteotomy through an anatomically contoured, low-profile design. Constructed from a highly biocompatible Ti-6Al-4V-ELI alloy and featuring a user-friendly locking block, PetaⓇ provides secure and re-tensionable closure, ensuring optimal stability and patient comfort.

Low-Profile Design
  • Minimally Invasive Access: The plate’s thin profile accommodates incisions in tight anatomical spaces, lessening postoperative discomfort and risk of soft tissue irritation.
  • Anatomical Contouring: Engineered to conform seamlessly to the curvature of the sternum or rib, enhancing implant stability while preserving natural bone alignment.
  • Highly Biocompatible: The titanium alloy demonstrates excellent osseointegration and minimal inflammatory response, making it suitable for long-term surgical implants.
  • Secure Lock Mechanism: Once fixed by the locking-block screw, there is no risk of self-loosening or accidental opening—critical for maintaining consistent compression across the osteotomy site.
  • Re-Tension Capability: The locking block screw can be loosened intraoperatively to re-tension the plate, streamlining adjustments and shortening operating room time.
  • Advanced Imaging Safety: MR compatibility ensures that patients requiring postoperative MRI can undergo imaging with minimal artifact and without necessitating plate removal.
  • Clinically Versatile: This feature is especially valuable for complex cases that demand ongoing multimodal imaging for diagnosis or follow-up.

Technical Advantages

Enhanced Stability

The rigid fixation achieved through titanium alloy construction and a low-profile locking system improves bone healing and reduces micromotion, crucial factors in preventing non-union or delayed union.

An anatomically contoured plate can decrease soft tissue irritation, potentially lowering patient discomfort and accelerating recovery timelines.

The ability to modify or re-tension the locking block screw intraoperatively offers precise control over compression, alignment, and overall surgical outcome.

Multiple plate lengths and shapes (depending on the system’s available catalog) enable surgeons to tailor the fixation construct to specific patient anatomies and surgical approaches.

一般產品規格

規格 細節 / 價值
產品名稱 Peta Sternal Closure Plate
預期用途 Rigid fixation of the sternum post sternotomy (open-heart surgery, thoracic intervention)
Plate Material Titanium alloy (e.g., Ti-6Al-4V ELI) or Stainless Steel (316L), depending on product line
Plate Thickness ~1.0–1.5 mm (typical range; verify your actual specs)
Plate Width ~10–15 mm (to provide adequate coverage over sternal edges)
Hole Configuration Round or oval holes for bone screws, spaced at intervals for adjustable fixation
Screw Compatibility Typically 2.4 mm or 2.7 mm diameter cortical bone screws (confirm actual)
Anatomical Shape May include slightly contoured or “anatomical” plates for better sternal conformance
MR 相容性 MR Conditional or Safe, depending on final metal composition
無菌 Sterile (Gamma or EO)
單次使用 是
保質期 ~5 years if packaging remains sealed
臨床適應症 Midline sternotomy closure, sternal stability improvement, prevention of dehiscence or infection
禁忌症 Grossly insufficient bone stock, active sternal infection (needing further debridement first), etc.

Peta Sternal Plates

Plate Length (mm) Hole Count Thickness (mm) Plate Shape 產品編號 注意事項
40 4 1.0 Straight PETA-40-4-1.0-S Short plate for partial sternal closure segments
40 4 1.2 Curved PETA-40-4-1.2-CV Slight curvature to match upper manubrium
50 5 1.0 Straight PETA-50-5-1.0-S Medium length, minimal thickness
50 5 1.2 Slightly contoured PETA-50-5-1.2-SC Subtle sternal conformance
60 6 1.0 Straight PETA-60-6-1.0-S Extended length for broader sternums
60 6 1.2 Curved PETA-60-6-1.2-CV Curved design for mid-lower sternum
60 8 1.5 Straight PETA-60-8-1.5-S Additional hole count for robust fixation, thicker plate version
70 6 1.0 Slightly contoured PETA-70-6-1.0-SC Longer coverage, minimal thickness
70 8 1.2 Curved PETA-70-8-1.2-CV More hole options for multi-screw stability, moderate thickness
80 8 1.2 Straight PETA-80-8-1.2-S Extended length for full sternum coverage
80 10 1.5 Slightly contoured PETA-80-10-1.5-SC Thicker plate, extended length, multiple hole fixations
90 10 1.2 Curved PETA-90-10-1.2-CV Very long plate for entire sternotomy line in certain surgeries
90 12 1.5 Straight PETA-90-12-1.5-S Maximum hole count for comprehensive fixation, thicker plate

相關商品