Atlas Coronair Stentsysteem Roestvrij Staal

Atlas Coronair Stentsysteem Roestvrij Staal

A roestvrij staal aanbod van coronaire stents robuust structurele integriteit en eenvoudig leverbaarheid voor routinematige percutane coronaire interventies (PCI), waarbij kostenefficiëntie wordt afgewogen tegen betrouwbare prestaties.

Informatie

De ATLAS Drug Eluting Coronary Stent System SS is a stainless steel (SS) stent platform coated with a sirolimus formulation (1 µg/mm²), designed to prevent restenosis and support durable revascularization in patients with coronary artery disease. By delivering a targeted antiproliferative effect at the lesion site, it is indicated for both de novo coronary lesions and in-stent restenosis (ISR) management, thereby extending its clinical versatility in the percutaneous coronary intervention (PCI) setting.

Stainless Steel Construction
  • High Strength-to-Weight Ratio: Enables thinner struts without sacrificing radial force, ensuring ease of deliverability and vessel conformability.
  • Proven Biocompatibility: Stainless steel has a long history of safe use in coronary interventions, supporting stable endothelization.
  • Optimized Strut Geometry: Precisely formed lattice structure provides consistent drug distribution and minimal tissue trauma.
  • Improved Crossability: The low-profile SS stent tracks smoothly through complex or calcified lesions, reducing the need for extensive lesion preparation.
  • Targeted Antiproliferation: Gradual drug release inhibits smooth muscle cell proliferation, a primary contributor to in-stent restenosis.
  • Enhanced Endothelialization: Balanced drug elution fosters early endothelial coverage, mitigating late stent thrombosis risk.
  • Fluoroscopic Precision: Platinum-iridium markers at the stent’s extremities promote accurate stent positioning in the coronary vasculature.
  • Reduced Geographic Miss: Clear visibility assists operators in precise stent deployment and lesion coverage.

Nominal pressure of 10 atm and a rated burst pressure of 20 atm provide interventional cardiologists the latitude to optimize stent expansion and device apposition based on lesion morphology.

Algemene productspecificaties

Specificatie Detail / Waarde
Productnaam Atlas Coronary Stent (Stainless Steel)
Stent Type Balloon-Expandable Coronary Stent
Materiaal 316L Stainless Steel (Medical Grade)
Strut Thickness ~100 μm (typical)
Ontwerp Open-Cell or Hybrid-Cell design (varies by specific model)
Nominal Pressure (NP) ~8–9 atm
Rated Burst Pressure (RBP) ~14–16 atm
Leveringssysteem Rapid-Exchange (RX) or Over-the-Wire (OTW), typically 140 cm shaft length
Compatibiliteit met geleidingsdraden 0.014”
Indicaties Coronary artery lesion scaffolding (may be used as BMS or platform for DES coating)
Contra-indicaties Lesions unsuitable for balloon-expandable stent, severely calcified vessels, left main disease if unprotected, etc.
Steriliteit Steriel (ethyleenoxide)
Eenmalig gebruik Ja
Houdbaarheid 2–3 years (based on final packaging and coating, if any)
Bedrijfstemperatuur Recommended 15–25 °C for storage

Gedetailleerd bestellen op maat & productcodes

Stent Diameter (mm) Stent Length (mm) Nominal Pressure (atm) RBP (atm) Productcode
2.00 8 8 14 ATLS-SS-2.00x08
2.00 12 8 14 ATLS-SS-2.00x12
2.00 15 8 14 ATLS-SS-2.00x15
2.00 18 9 16 ATLS-SS-2.00x18
2.00 24 9 16 ATLS-SS-2.00x24
2.00 28 9 16 ATLS-SS-2.00x28
2.00 32 9 16 ATLS-SS-2.00x32
2.00 38 9 16 ATLS-SS-2.00x38
2.25 8 8 14 ATLS-SS-2.25x08
2.25 12 8 14 ATLS-SS-2.25x12
2.25 15 8 14 ATLS-SS-2.25x15
2.25 18 9 16 ATLS-SS-2.25x18
2.25 24 9 16 ATLS-SS-2.25x24
2.25 28 9 16 ATLS-SS-2.25x28
2.25 32 9 16 ATLS-SS-2.25x32
2.25 38 9 16 ATLS-SS-2.25x38
2.50 8 8 14 ATLS-SS-2.50x08
2.50 12 8 14 ATLS-SS-2.50x12
2.50 15 8 14 ATLS-SS-2.50x15
2.50 18 9 16 ATLS-SS-2.50x18
2.50 24 9 16 ATLS-SS-2.50x24
2.50 28 9 16 ATLS-SS-2.50x28
2.50 32 9 16 ATLS-SS-2.50x32
2.50 38 9 16 ATLS-SS-2.50x38
2.75 8 8 14 ATLS-SS-2.75x08
2.75 12 8 14 ATLS-SS-2.75x12
2.75 15 8 14 ATLS-SS-2.75x15
2.75 18 9 16 ATLS-SS-2.75x18
2.75 24 9 16 ATLS-SS-2.75x24
2.75 28 9 16 ATLS-SS-2.75x28
2.75 32 9 16 ATLS-SS-2.75x32
2.75 38 9 16 ATLS-SS-2.75x38
3.00 8 8 14 ATLS-SS-3.00x08
3.00 12 8 14 ATLS-SS-3.00x12
3.00 15 8 14 ATLS-SS-3.00x15
3.00 18 9 16 ATLS-SS-3.00x18
3.00 24 9 16 ATLS-SS-3.00x24
3.00 28 9 16 ATLS-SS-3.00x28
3.00 32 9 16 ATLS-SS-3.00x32
3.00 38 9 16 ATLS-SS-3.00x38
3.50 8 8 14 ATLS-SS-3.50x08
3.50 12 8 14 ATLS-SS-3.50x12
3.50 15 8 14 ATLS-SS-3.50x15
3.50 18 9 16 ATLS-SS-3.50x18
3.50 24 9 16 ATLS-SS-3.50x24
3.50 28 9 16 ATLS-SS-3.50x28
3.50 32 9 16 ATLS-SS-3.50x32
3.50 38 9 16 ATLS-SS-3.50x38
4.00 8 8 14 ATLS-SS-4.00x08
4.00 12 8 14 ATLS-SS-4.00x12
4.00 15 8 14 ATLS-SS-4.00x15
4.00 18 9 16 ATLS-SS-4.00x18
4.00 24 9 16 ATLS-SS-4.00x24
4.00 28 9 16 ATLS-SS-4.00x28
4.00 32 9 16 ATLS-SS-4.00x32
4.00 38 9 16 ATLS-SS-4.00x38

Gerelateerde producten