DolphinPro Support Catheter

DolphinPro Support Catheter

ა crossing support catheter for რთული peripheral or coronary lesions, featuring a reinforced shaft და hydrophilic coating to ease device delivery.

ინფორმაცია

DolphinPro Support Catheter by Invamed is specifically engineered to cross complex lesions in difficult anatomies during femoro-popliteal and below-the-knee procedures. Its robust stainless steel double-braiding ensures a kink-resistant design with exceptional torque control, allowing seamless navigation through tortuous vessels. By featuring a small crossing profile, DolphinPro delivers unparalleled support and pushability, facilitating successful lesion crossing and enabling telescope technique in endovascular interventions.

Stainless Steel Double-Braiding

A unique multi-layer shaft construction combines kink resistance with dynamic torque control, providing stable maneuverability even in challenging anatomical routes.

Seamlessly transfers applied force from the proximal shaft to the distal tip, aiding clinicians in tackling complex, heavily calcified or eccentric lesions without compromising on control.

Minimizes friction and vessel trauma, improving guidewire-to-catheter transitions. This design optimizes trackability within narrow below-the-knee vessels or severe occlusive segments.

DolphinPro’s flexible distal segment and supportive proximal section facilitate telescope approach, helping operators reach distal lesions and perform targeted interventions under precise control.

Ideal for femoro-popliteal occlusions, tibioperoneal blockages, or challenging SFA lesions, where high pushability and low-profile crossing are crucial to procedural success.

  • Extreme vessel tortuosity or diameter below specification
  • Active infection or severe vessel dissection precluding wire-based recanalization
  • Patient conditions contraindicating endovascular procedures

Technical Specifications

სპეციფიკაცია დეტალი / ღირებულება
პროდუქტის დასახელება DolphinPro Support Catheter
დანიშნულებისამებრ გამოყენება Lesion crossing and support in femoro-popliteal & BTK interventions
Shaft Construction Stainless Steel Double-Braiding with advanced polymer coatings
Proximal Diameter Low-profile crossing design; verify available French sizes based on region
Distal Tip Profile Tapered, reinforced tip for improved guidewire entry and lesion crossing
Length Options Common lengths ranging from 65 cm to 150 cm; additional lengths upon request
გამტარი მავთულის თავსებადობა Typically 0.014” or 0.018” (verify exact compatibility)
რადიოშეღწევადობა Radiopaque distal tip and markers for precise visualization
სტერილობა Provided sterile (single use)
კლინიკური ჩვენებები Chronic total occlusions, tight stenoses, calcific occlusions in fem-pop & BTK vasculature

Size & Ordering Matrix

ფრანგული ზომა Usable Length (cm) Guidewire Tip Shape პროდუქტის კოდი შენიშვნები
2.4 – 2.6 65 / 90 / 135 0.014” Straight, Tapered DPH-2.6-XX-014 Suited for BTK interventions requiring flexible distal tip and stable proximal support
2.4 – 2.6 100 / 150 0.014” Straight, Tapered DPH-2.6-XX-014 Extended length for deeper lesions in SFA or popliteal region
3.0 80 / 135 / 150 0.018” Slight Angled (option) DPH-3.0-XX-018 Larger internal diameter for enhanced pushability and crossing in more robust vessel segments
4.0 80 / 135 / 150 0.018” Slight Angled (option) DPH-3.0-XX-018 Larger internal diameter for enhanced pushability and crossing in more robust vessel segments
5.0 80 / 135 / 150 0.018” Slight Angled (option) DPH-3.0-XX-018 Larger internal diameter for enhanced pushability and crossing in more robust vessel segments
6.0 80 / 135 / 150 0.035” Slight Angled (option) DPH-3.0-XX-035 Larger internal diameter for enhanced pushability and crossing in more robust vessel segments
7.0 80 / 135 / 150 0.035” Slight Angled (option) DPH-3.0-XX-035 Larger internal diameter for enhanced pushability and crossing in more robust vessel segments

მსგავსი პროდუქტები